Electron Beam Conduit Liner Systems

Back to Products Page

CONDUIT LINER SYSTEMS

Teflon Liner | Nylon Liner | Liner Stop | Instant Adhesive

Teflon Liner

Ref. No.: A-1875

Due to its smooth, slippery surface, the Teflon Liner is useful for pulling both 3/64” (1.2mm) and 1/16” (1.6mm) Aluminum Electrode. It installs in the QCC® or QCC-HD® Conduits, making an aluminum system with all the advantages of steel reinforcement. Teflon Liner comes in .125” (3.2mm) I.D. x 50’ (15.2m) lengths and is easily cut to length for field installation. Screw on a Liner Stop to the inlet end to retain position in the conduit.

To Top

Teflon Liner

A-1875

Nylon Liner

Ref. No.: A-1874

Nylon Liner has superior life when compared to Teflon, but with some sacrifice to lubricity. Like the Teflon Liner, the Nylon Liner installs in the QCC® or QCC-HD® Conduits. Nylon Liner comes in .140” (3.6mm) I.D. x 100’ (30.48m) lengths and is easily cut to length for field installation. Screw on a Liner Stop to the inlet end to retain position in the conduit.

To Top

Nylon Liner

A-1874

Liner Stop

Ref. No.: A-1662

Screw on to the inlet end of either the Teflon or Nylon Liner to retain position in the conduit.

To Top

(Liner Stop shown larger than actual size)

Liner Stop

A-1662

Instant Adhesive

Ref. No.: A-1876

For a more permanent installation, apply a small amount to liner exterior, inlet end, then thread on the Liner Stop.

To Top

Instant Adhesive

A-1876

DESCRIPTION	REF. NO.	MATES TO:
Teflon Liner	A-1875	QCC® and QCC-HD® Conduit
Nylon Liner	A-1874	QCC® and QCC-HD® Conduit
Liner Stop	A-1662	Inlet End of Teflon or Nylon Liner
Instant Adhesive	A-1876	--

Electron Beam Technologies, Inc.

1275 Harvard Drive • Kankakee, IL 60901 • USA Ph: 815-935-2211 • Fax: 815-935-8605

Electron Beam Technologies, Inc., Copyright 2006
Reproduction of our web site in part or entirety is strictly forbidden without written consent from Electron Beam Technologies, Inc.